Mechanical Fasteners
What’s the
MS® Fastener ?
The only screw-on fastener that
is innovative and easy to install
A Revolutionary Fastener
The MS® Fastener is an innovative and fast solution
to join your belts by simply screwing them together.
Designed and patented by MLT, this mechanical splice is
extremely easy to install.
It is inspired by rivet fastener technology, bringing a
major evolution in its ease of installation. Indeed, the
MS® Fastener is a metal fastener to be screwed.
The installation screws are self-threading screws: no
need to pre-drill or use templates. Screws pass directly
through the belt when the fastener is installed (from 3.5
to 18 mm thick).
Also, it’s easy and simple installation does not require
any special tools: an electric or pneumatic driver is
enough.
The MS® Fastener then falls into the category as truly
revolutionary in the metal fastener market, as it is more
economical, practical and safe.
Resistant
in all situations
It can be installed on high tensile strength belts: up to 800
PIW (1250N/mm) and pulley diameters from 3’’ to 18’’ (75
to 450 mm). Its screws enable you to easily tighten the
fastener on the belt with a “vice effect.”
By using the stainless steel fastener, the MS® Fasteners
joins the belts designed for the food, beverage and
recycling industries.
Our fasteners are segmented for ease of breaking to your
desired width.
The connecting pin is available in diameters from 4 to 10
mm (.3’’ to .18’’). Available in coated steel or in stainless
steel coated polyamide.